Canon EOS REBEL T2i 说明手册
98
FE lock locks the flash exposure setting over the desired area of the
subject. This feature can also be used with a Canon EX-series Speedlite.
subject. This feature can also be used with a Canon EX-series Speedlite.
* FE stands for Flash Exposure.
1
Press the <D> button to pop-up
the built-in flash.
the built-in flash.
Press the shutter button halfway and
look in the viewfinder to check that
the <D> icon is lit.
look in the viewfinder to check that
the <D> icon is lit.
2
Focus the subject.
3
Press the <A> button.
(8)
Aim the spot-metering circle over the
subject, then press the <A> button.
subject, then press the <A> button.
X
The flash will fire a preflash and the
required flash output is calculated
and retained in memory.
required flash output is calculated
and retained in memory.
X
In the viewfinder, “FEL” is displayed
for a moment and <d> will light.
for a moment and <d> will light.
Each time you press the <A> button,
a preflash is fired and the required
flash output is calculated and retained
in memory.
a preflash is fired and the required
flash output is calculated and retained
in memory.
4
Take the picture.
Compose the shot and press the
shutter button completely.
shutter button completely.
X
The flash is fired to take the picture.
A
FE LockN
If the subject is too far away and beyond the effective range of the flash, the
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
Spot metering circle
COP
Y