Canon PowerShot SX130 IS 用户指南
Using the Face Self-Timer
64
The shutter will release approximately two seconds after the camera detects
a new face (p. 80). You can use this when the photographer wants to be in
the image, such as a group photo.
a new face (p. 80). You can use this when the photographer wants to be in
the image, such as a group photo.
Choose .
●
Follow Steps 1 – 2 on p. 59 to choose
,
then press the
l button.
●
Press the
qr buttons or turn the  dial to
choose
, then press the
l button.
Compose the shot and press the
shutter button halfway.
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
and [Look straight at camera to start count
down] will appear on the screen.
X
The lamp will blink and the self-timer
sound will play.
sound will play.
Join the subjects and look at the
camera.
camera.
X
When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and two
seconds later the shutter will release.
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and two
seconds later the shutter will release.
●
To cancel shooting with the timer after
countdown has started, press the
countdown has started, press the
p button.
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately 15 seconds later.
•
If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer
COP
Y