Canon PowerShot SX130 IS 用户指南

94

Just like with Exposure Compensation (p. 68), you can adjust the exposure 
±2 stops in 1/3-stop increments when using the flash.

~.

●

After pressing the 

m button, press the 

op buttons to choose ~.

●

Press the 

qr buttons or turn the Â dial to 

choose the amount of flash exposure 
compensation, then press the 

m button.

X

Once set, 

~ will appear on the screen.

Adjusting the Flash Exposure Compensation

The camera automatically changes the shutter speed or aperture value when the 
flash fires to avoid overexposing and blowing out the highlights in the scene. 
However, if you press the 

n button to display the 4 tab and set [Safety FE] 

to [Off] in [Flash Settings], the shutter speed and aperture value will not 
automatically adjust.

You can also set the flash exposure compensation. Press the 

n 

button and choose [Flash Settings] (p. 93) from the 

4 tab. Then choose 

[Flash Exp. Comp] and press the 

qr buttons to choose a setting.

With the flash raised, if you press the 

r button and immediately press the 

n button, the setting screen will appear.

COP

Y