Canon VB-R13VE 手册
Setting Page
5
145
Changing/Deleting a Privacy Mask
Privacy Mask Registration Area
This shows the positions of privacy mask areas in the entire area that can be captured by the camera.
(1)
Entire Area That Camera Can Capture
This shows the area that can physically be captured.
If a panorama image is registered in the camera, the panorama image is displayed here.
(2)
View Restriction Area
Appears in gray if view restrictions have been configured (P. 127).
Appears in gray if view restrictions have been configured (P. 127).
(3)
Privacy Mask Areas
Privacy mask areas with [Mask area] set to [Enable] (P. 144) are filled in.
Privacy mask areas with [Mask area] set to [Enable] (P. 144) are filled in.
Privacy mask areas with [Mask area] set to [Disable] (P. 144) have diagonal lines displayed in them.
(4)
Preview Frame
Indicates the current position of the camera displayed in the video display area.
Changing Mask Position and Size
How to Select a Privacy Mask
The following methods are available for selecting the privacy mask area.
• Click the privacy mask area you want to change in the privacy mask registration area.
• Click [Preview] in the mask area you want to display.
• Click the privacy mark area displayed in the video display area.
Important
• Check privacy mask settings again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings.
• You will need to set the position of the privacy mask again if you change the [Image Flip] setting in [Camera] > [Camera] >
[Installation Conditions].
• If you reconfigure privacy mask settings after you changed the [Camera] > [Camera] > [Camera Control] > [Image Stabilizer],
reconfigure all privacy mask positions and sizes.
• After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible
when the camera direction is altered.
• Privacy masks may deviate slightly from the specified position depending on the zoom position.
• If you change the privacy mask settings after saving a panorama image using the panorama function, you must use the
panorama function to recreate the panorama image (P. 123).
R13 R12 M50
(1)
(1)
R13 R12 M50
H652 H651
(4)
(3)
(2)
(3)
R13 R12 M50
R13 R12 M50
R13 R12 M50
1
Select the privacy mask area you want to change.
2
Change the position and size of the privacy mask area.