Canon vb-s30D 操作指南

134

After changing the preview frame, the video display area will 
continue to display the cropped video corresponding to the 

preview frame even after the Viewer PTZ panel is closed. 

However, when you reconnect to Admin Viewer, the initial status 
will be restored.

„ Exiting Viewer PTZ

Click the [Viewer PTZ] button again. The Viewer PTZ 

panel closes and Viewer PTZ is exited. 

„ Differences Between Viewer PTZ and Digital 

Viewer PTZ and Digital PTZ are both simple pan, tilt, and 

zoom functions that use the digital zoom function, but they 

have the following differences because they employ 

different operating principles.

When you have obtained control privileges, click the 

[Control for Admin] button to display the Control for Admin 

Panel and perform camera operation and video settings.

„ Opening/Closing and Moving Control Items

Clicking the title of a control item will open or close it.

You can open the various control items even without 
obtaining the camera control privileges, but all items other 
than [Video Reception] are not available.
You can also reorder control items using the up/down 
buttons.

„ Performing Operations and Settings

Click the camera control buttons to set the pan, tilt and 

zoom operations as well as the speed. 

(1) [Pan/Tilt] button

Move pan and tilt in the direction of the arrows. 

Operation will continue as long as you are holding 

down the button and will stop when you release it. 

Clicking the center button will make the camera face 

straight forwards. 

(2) [Zoom] buttons

Zooms in or out. Operation will continue as long as 

you are holding down the button and will stop when 

you release it. 

(3) [Pan/Tilt] Speed

Select a speed from [Fast], [Normal] and [Slow]. 

(4) [Zoom] Speed

Set the speed to [Fast] or [Slow]. 

Viewer PTZ

Digital PTZ 

Enlarges the specified part of 
the video transmitted from the 
camera and then displays it in 
the viewer.

Transmits only the trimmed 
part of the entire area that can 
be captured by the camera.

The size of the received data 
is large.

The size of the received data 
is small.

Can be used only in Admin 
Viewer.

Can be used in both Admin 
Viewer and VB Viewer.

PTZ operation can be 
performed independently for 
each viewer.

Independent operation cannot 
be performed for each viewer 
(if multiple viewers are 
connected, the same display 
is applied in the other 
viewers).

⇔

⇔

(1)

(2)

(3)

(4)