Canon VB-R13VE 手册

78



Motion Detection Recording Settings

 

Using the Camera for Motion Detection

(1)

[Detect Motion Using]

Select [Cameras] to detect motion using a camera.

(2)

[Do not record]

Select this item if you do not want recording to start when motion is detected.

You can use this to individually enable or disable recording for each area. For example, you may want to record 

when motion is detected around a vault, but not record when motion is detected around an entrance.

(3)

[Start Recording]
Start recording when motion is detected.

(4)

[Priority]
Select the event priority. For details, please refer to “Check Events” (P. 115).

The other settings are the same as those for continuous recording (P. 75).

To use motion detection, you must create a schedule with motion detection using the camera’s schedule setting tool.

Note

• If the camera supports four motion detection areas, tabs named [Area 1] through [Area 4] are displayed in the recording settings 

area. You can specify settings individually for each motion detection area.

• The [Area Name] box displays the name of the area that is registered in the camera.

• To use a camera for motion detection, you must configure the motion detection settings on the camera. For details, please refer to 

the camera manual.

• When using the camera for motion detection with more than one motion detection area, you can specify the event priority for each 

area.

• Motion detection is suspended when the camera is panning, tilting or zooming, irrespective of the motion detection settings.

• If motion is detected in multiple motion detection areas that have the same priority, recording will start with the area having the 

lowest number.

RM-64/25/9

Important

The motion detection feature is not suitable for applications where high reliability is required. We recommend that you do not use 
the motion detection feature in applications such as surveillance, which require high reliability. Canon cannot take responsibility 
for any accidents or damages associated with using the motion detection feature.

(1)

(2)
(3)
(4)

C50F C50i