Canon EF 35mm f/1.4L USM 手册

Specifications

Angle of view

Lens

construction

Minimum

aperture

Max. magnification and field of view

Min. focusing

distance

Filter diameter

Hood

Max. diameter and length

Weight

Case

Diagonal

Vertical

Horizontal

EF14mm f/2.8L USM

114°

81°

104°

10-14

0.10X/246 × 375 mm (9.7” × 14.8”)

0.25 m/0.82 ft.

*1 <3>

77 × 89 mm (3.0” × 3.5”)

560 g/19.6 oz.

LP1016

EF20mm f/2.8 USM

94°

62°

84°

9-11

0.14X/176 × 264 mm (6.9” × 10.4”)

0.25 m/0.82 ft.

72 mm <1>

EW-75II

77.5 × 70.6 mm (3.1” × 2.8”)

405 g/14.2 oz.

LP1214

EF24mm f/1.4L USM

84°

53°

74°

9-11

0.16X/150 × 227 mm (5.9” × 8.9”)

0.25 m/0.82 ft.

77 mm <1>

EW-83DII

83.5 × 77.4 mm (3.3” × 3.1”)

550 g/19.4 oz.

LP1214

EF28mm f/1.8 USM

75°

46°

65°

9-10

0.18X/139 × 212 mm (5.5” × 8.3”)

0.25 m/0.82 ft.

58 mm <1>

EW-63II

73.6 × 55.6 mm (2.9” × 2.2”)

310 g/10.9 oz.

LP814

EF35mm f/1.4L USM

63°

38°

54°

9-11

0.18X/136 × 206 mm (5.4” × 8.1”)

0.3 m/0.98 ft.

72 mm <1>

EW-78C

79 × 86 mm (3.1” × 3.4”)

580 g/20.5 oz.

LP1214

EF50mm f/1.4 USM

46°

27°

40°

6-7

0.15X/164 × 249 mm (6.5” × 9.8”)

0.45 m/1.48 ft.

58 mm <2>

ES-71II

73.8 × 50.5 mm (2.9” × 2.0”)

290 g/10.2 oz.

LP1014

EF85mm f/1.8 USM

28°30’

16°

24°

7-9

0.13X/191 × 287 mm (7.5” × 11.3”)

0.85 m/2.79 ft.

58 mm <1>

ET-65III

75 × 71.5 mm (3.0” × 2.8”)

425 g/14.9 oz.

LP1014

EF100mm f/2 USM

24°

14°

20°

6-8

0.14X/175 × 262 mm (6.9” × 10.3”)

0.9 m/2.95 ft.

58 mm <2>

ET-65III

75 × 73.5 mm (3.0” × 2.9”)

460 g/16.1 oz.

LP1014

EF200mm f/2.8L USM

12°

7°

10°

7-9

0.16X/152 × 226 mm (6” × 8.9”)

1.5 m/4.92 ft.

72 mm <2>

83 × 136.2 mm (3.3” × 5.4”)

790 g/27.7 oz.

LH-D18

*1 Built-in gelatine filter holder *2 Built-in

●

❾

CT1-7538-004

2006.9.1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled

“Digital Apparatus”, ICES-003 of the Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques (de la classe B) prescrites dans le Règlement

sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

8. Hood

The hood can keep unwanted light out of the lens, and also

protects the lens from rain, snow, and dust. Engage the hood

attachment tabs on the lens with the tabs on the hood and

turn the hood in the direction of the arrow to secure it to the

lens.
[Bayonet type]

EF20mm f/2.8 USM, EF28mm f/1.8 USM and EF50mm

f/1.4 USM (sold separately), and EF24mm f/1.4L USM and

EF35mm f/1.4L USM (supplied with the lens).

To fit the hood on the EF20mm f/2.8 USM, EF24mm f/1.4L

USM, EF28mm f/1.8 USM or EF35mm f/1.4L USM, align

the hood’s attachment position mark with the red dot on the

front of the lens, then turn the hood clockwise until the lens’s

red dot is aligned with the hood’s stop position mark

❾

When attaching or detaching the hood, grasp the base of the

hood to turn it. To prevent deformation, do not grasp the rim

of the hood to turn it.

Though there is no red dot on the hood for the EF50mm f/1.4

USM (ES-71II), the attachment procedure is the same.

• Part of the picture may be blocked if the hood is not

attached properly.

• The hood can be reverse-mounted on the lens for storage.
[Clip-on type]

EF85mm f/1.8 USM, EF100mm f/2 USM (sold separately)

Press the buttons on both sides of the hood to attach as

illustrated .
[Cut-in type]

①

Fixed type EF14mm f/2.8L USM

The hood and lens are a single unit.

②

Pull-out type EF200mm f/2.8L USM

Pull the hood out from the front of the lens to use .

The lens length is measured from the mount surface to the

front end of the lens. Add 21.5 mm when including the lens

cap and dust cap.

The size and weight listed are for the lens only, except as

indicated.

Product specifications and appearance are subject to

change without notice.