Canon DP-V3010 手册
35
Using the OSD Menu
Inputting Characters
This section describes how to input characters. Use this function to specify a channel name, a display name, or
filename.
filename.
1. Press the MENU button to open the OSD menu.
2. The character input screen appears automatically when
character input is required.
Use the buttons to move the selection frame as
required.
Use the buttons to move the selection frame as
required.
3. Press the
buttons to select the required character.
The following characters can be selected: Press
buttons to display them one by one. You can input up to 16
characters.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
Some characters cannot be used for a filename. In this case, they are automatically skipped.
characters.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
Some characters cannot be used for a filename. In this case, they are automatically skipped.
4. Repeat steps 2 and 3 until the desired text has been inputted.
5. Press the SET button when input is complete.
The selection frame moves to "OK".
6. Check the content and press the SET button to confirm settings.
Reference
• When selecting "Cancel" or pressing MENU button before selecting "OK", the settings will be discarded and the previous
screen will be displayed.
• To erase the character in the selection frame, press the RESET button above SHARPNESS or CHROMA.