Canon DP-V3010 手册
44
OSD Menu
Item
Setting Options (underline indicates factory default)
HDR Range
Sets the display method when Gamma for HDR display is selected.
Canon Log (HDR): Sets the "Canon Log" dynamic range to be displayed, from 0 to 800%.
Canon Log (HDR): Sets the "Canon Log" dynamic range to be displayed, from 0 to 800%.
(in 100 increments)
100 to 800
Canon Log 2 (HDR): Sets the "Canon Log 2" dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
100 to 1600
Canon Log 3 (HDR): Sets the "Canon Log 3" dynamic range to be displayed, from 0 to 1600%. (in
100 increments)
100 to 1600
100 to 1600
SMPTE ST 2084: Sets the dynamic range to be displayed from 0.005 to 10,000 nit that "SMPTE ST
2084" has. (in 100 increments)
100 to 4000 (2000)
Hybrid Log-Gamma Y/RGB: Sets how far to display the "Hybrid Log-Gamma" dynamic range. (100
to 1000 in increments of 100)
The upper limit value will change to match the settings of "Hybrid Log-Gamma
System". (
The upper limit value will change to match the settings of "Hybrid Log-Gamma
System". (
Hybrid Log-Gamma Y: 100 to 1000/2000/4000
Hybrid Log-Gamma RGB: 100 to 1000/2000
Hybrid Log-Gamma RGB: 100 to 1000/2000
Setting procedures
The procedures below use Canon Log (HDR) as an example.
When the maximum value (800%) is specified, the 800% dynamic range of Canon Log is assigned
to the dynamic range of the video display. Although the brightness in appearance lowers, you can
check the dynamic range included in video signals. When 200% is specified, part exceeding 200%
is clipped (gradation is saturated) and part up to 200% is assigned to the dynamic range of the video
display.
"SMPTE ST 2084" has the dynamic range of 0.005 to 10,000 nit. Therefore, when the maximum
value (4000 nit) is specified, part exceeding 4000 nit is clipped and part up to 4000 nit is assigned
to the dynamic range of the video display. Although the brightness in appearance lowers, you can
check the dynamic range up to 4000 nit. When 1000 nit is specified, part exceeding 1000 nit is
clipped and part up to 1000 nit is assigned to the dynamic range of the video display.
The brightness of the video display corresponds to the value set for Contrast.
The procedures below use Canon Log (HDR) as an example.
When the maximum value (800%) is specified, the 800% dynamic range of Canon Log is assigned
to the dynamic range of the video display. Although the brightness in appearance lowers, you can
check the dynamic range included in video signals. When 200% is specified, part exceeding 200%
is clipped (gradation is saturated) and part up to 200% is assigned to the dynamic range of the video
display.
"SMPTE ST 2084" has the dynamic range of 0.005 to 10,000 nit. Therefore, when the maximum
value (4000 nit) is specified, part exceeding 4000 nit is clipped and part up to 4000 nit is assigned
to the dynamic range of the video display. Although the brightness in appearance lowers, you can
check the dynamic range up to 4000 nit. When 1000 nit is specified, part exceeding 1000 nit is
clipped and part up to 1000 nit is assigned to the dynamic range of the video display.
The brightness of the video display corresponds to the value set for Contrast.
800%
200%
800%
200%
200%
Canon Log 800% signal
(Contrast: 2000)
Canon Log (HDR): Set to 800
Canon Log (HDR): Set to 200
Canon Log
range
range
Canon Log
range
range
DP-V3010
range
range
DP-V3010
range
range
Gradation is reproduced by assigning
the range to the range of the DP-V3010
(which lowers the brightness).
the range to the range of the DP-V3010
(which lowers the brightness).
Clip (Saturates
gradation.)
gradation.)
Brightness
value
corresponding
to the contrast
setting
value
corresponding
to the contrast
setting