Canon DP-V3010 手册

OSD Menu

Item

Setting Options (underline indicates factory default)

Color Range

Sets the quantization range.
Automatic: Sets the range based on signal information automatically.
Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235): Limits the black and white range.

Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)

Limited 2 (16-255): Limits the black range.

Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)

Note

• When "1.0" is selected for "ACES", under "Compatible Settings", it can be used except when

"ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut".

• Operations when "Automatic" is selected are described below.

When DisplayPort is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically
depending on DisplayPort signal information.

When SDI is selected, the setting is configured according to the settings for Picture Mode,
Color Gamut, and Gamma.

Setting Options

Color Range to be Set

Picture Mode

DCI-P3

Full (0-255)

Color Gamut

DCI-P3,
Cinema Gamut to DCI,
DCI-P3+ to DCI

Gamma

Canon Log (HDR),
Canon Log 2 (HDR),
Canon Log 3 (HDR),
SMPTE ST 2084

Canon Log, Canon Log 2,
Canon Log 3

Limited 2 (16-255)

Other than the above

Limited 1 (16-235)

The factory default settings for each channel is shown in the following table.

CH1

CH2

CH3

CH4

CH5 to CH30

Input Configuration

3G/HD-SDI 1

3G/HD-SDI 2

Dual Link HD-SDI

DisplayPort

–

Select Input Signal

Automatic

Format

Automatic

Internal Sync

Off

Channel Name

(Blank)

Picture Mode

DCI-P3

Color Range

Automatic

– : not set