ASUS B85M-G 用户手册

ASUS B85M-G

1-7

This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module 

(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but 

is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are 

developed for better performance with less power consumption. The figure illustrates the 

location of the DDR3 DIMM sockets:

Channel A

DIMM_A1 & DIMM_A2

Channel B

DIMM_B1 & DIMM_B2

DIMM_A1 DIMM_A2

DIMM_B1 DIMM_B2

You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM 

sockets.

• 

You may install varying memory sizes in Channel A and Channel B. The system maps 

the total size of the lower-sized channel for the dual-channel configuration. Any excess 

memory from the higher-sized channel is then mapped for single-channel operation.

• 

Due to Intel

®

 chipset limitation, DDR3 1600MHz and higher memory modules on XMP 

mode will run at the maximum transfer rate of DDR3 1600MHz.

• 

Always install DIMMs with the same CAS latency. For optimal compatibility, we 

recommend that you install memory modules of the same version or date code (D/C) 

from the same vendor.  Check with the retailer to get the correct memory modules. 

• 

Due to the memory address limitation on 32-bit Windows

®

 OS, when you install 4GB 

or more memory on the motherboard, the actual usable memory for the OS can be 

about 3GB or less. For effective use of memory, we recommend that you do any of the 

following:

- 

Use a maximum of 3GB system memory if you are using a 32-bit Windows

®

 OS.

 

- 

 Install a 64-bit Windows

®

 OS if you want to install 4GB or more on the 

motherboard.

• 

This motherboard does not support DIMMs made up of 512 megabits (Mb) chips or 

less.

• 

The maximum 32GB memory capacity can be supported with 8GB or above DIMMs. 

ASUS will update the memory QVL once the DIMMs are available in the market.