ASUS CROSSHAIR V FORMULA-Z 用户手册

5-6

Chapter 5: RAID support

A floppy disk with the RAID driver is required when installing a Windows

®

 operating system 

on a hard disk drive that is included in a RAID set.

• 

The motherboard does not provide a floppy drive connector. You have to use a USB

The motherboard does not provide a floppy drive connector. You have to use a USB 

floppy disk drive when creating a SATA RAID driver disk.

• 

Windows

Windows

®

 XP may not recognize the USB floppy disk drive due to Windows

®

 XP 

limitation. To work around this OS limitation, refer to section 5.2.4 Using a USB 

floppy disk drive.

To create a RAID driver disk without entering the OS:
1. 

Boot your computer.

2. 

Press <Del> during POST to enter the BIOS setup utility.

3.   Set the optical drive as the primary boot device.
4.   Insert the support DVD into the optical drive.
5. 

Save changes and exit BIOS.

6.   When the Make Disk menu appears, press <1> to create a RAID driver disk.
7.   Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>.
8.   Follow the succeeding screen instructions to complete the process.

1. 

Start Windows

®

.

2.   Plug the USB floppy disk drive and insert a floppy disk.
3.   Place the motherboard support DVD into the optical drive.
4.   Go to the

Go to the Make Disk menu, and then click AMD AHCI/RAID 32/64bit xxxx Driver to 

create a RAID driver disk.

5.   Select USB floppy disk drive as the destination disk.
6.   Follow the succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid a computer virus infection.