ASUS RS700-E7/RS8 用户手册

Chapter 2:  Hardware setup

2-22

You may need to remove previously installed system components when installing 

or removing system devices. Or you may need to install the optional components 

into the system. This section tells how to remove/install the following components:
1.  System fans
2.  Redundant power supply module
3.  Slim type optical drive (optional)
4.  ASUS PIKE RAID card (REQUIRED)

1.  Ensure to install the ASUS PIKE RAID card for the HDDs to be recognized 

for system bootup.

2.  Ensure that the system is turned off before removing any components. 

To uninstall the system fans:
1.  Disconnect the system fan cable 

from the fan connector on the 

motherboard.

2.  Lift the fan, then set aside.
3.  Repeat steps 1 to 2 to uninstall the 

other system fans.

To reinstall the system fans
1.  Insert the fan to the fan cage. The 

airflow directional arrow on the 

fan side should point towards the 

system rear panel.

2.  Connect the system fan cable to the 

fan connector on the motherboard.