Kathrein CAS 80gr 20010027 产品宣传页
产品代码
20010027
Offset parabolic antennas
Features
Consists of refl ector, feed system
support and mast support
support and mast support
Refl ector made of aluminium,
powder coated
powder coated
Feed system support made of
galvanised sheet steel, plastics
coated
galvanised sheet steel, plastics
coated
All connectors (screws, rivets, discs)
are made of corrosion-resistant
stainless steel and zinc die-casting
are made of corrosion-resistant
stainless steel and zinc die-casting
Cable holder for up to
8 coaxial cables
8 coaxial cables
Threaded clamp of hot-dip
galvanised steel
galvanised steel
High ease of installation:
Completely pre-mounted, refl ector
keyhole fi xing system, zinc die-cast
wing nuts, standardised hexagon
size, elevation scale on both sides,
minimal support arm dimensions due
to fold-down feature
Completely pre-mounted, refl ector
keyhole fi xing system, zinc die-cast
wing nuts, standardised hexagon
size, elevation scale on both sides,
minimal support arm dimensions due
to fold-down feature
Optimal electrical data in lowest
mechanical dimensions due to
offset-feed
mechanical dimensions due to
offset-feed
Available in graphite-grey, white or
red-brown
red-brown
TÜV design approved
No additional components are
required to be able to mount two
universal feed systems to receive
the signals of satellites 3° to 4°
(ASTRA 19.2°/23.5°) or 6°
(e.g. ASTRA/EUTELSAT-HOTBIRD)
apart on the boom
required to be able to mount two
universal feed systems to receive
the signals of satellites 3° to 4°
(ASTRA 19.2°/23.5°) or 6°
(e.g. ASTRA/EUTELSAT-HOTBIRD)
apart on the boom
For any other combination, the
ZAS 90 multifeed-adaptor plate is
additionally required.
ZAS 90 multifeed-adaptor plate is
additionally required.
CAS 80
with UAS 58x
Offset parabolic antennas
CAS 80gr
CAS 80ro
CAS 80ws
CAS 80ro
CAS 80ws
20010027
20010028
20010029
20010028
20010029