ASUS ESC2000 Personal SuperComputer 快速安装指南
Chapter 2: Components
2-8
2.5
Installing ASUS PIKE SAS RAID card
The ASUS PIKE SAS RAID card allows users to create SAS RAID sets from SAS
hard disk drives connected to the SAS connectors on the motherboard.
A
2
3
4
5
B
C
D
B
A
C
D
1
1. Install the iButton*.
2. Insert the PIKE SAS RAID card into the PIKE card slot.
3. Remove the SATAII/SAS cables from the onboard SATA connectors.
4. Connect the SATAII/SAS cables to the SAS1–4 connectors on the
2. Insert the PIKE SAS RAID card into the PIKE card slot.
3. Remove the SATAII/SAS cables from the onboard SATA connectors.
4. Connect the SATAII/SAS cables to the SAS1–4 connectors on the
motherboard and the CON1–4 connectors on the SATAII/SAS backplane
board*.
5. Move the SGPIO_SEL1 jumper on the SATAII/SAS backplane to 2–3.
* PIKE 1078 module won’t function if the iButton is not installed.
* PIKE 1078 module won’t function if the iButton is not installed.
Order P/N
Description
90-C1SCM0-00UAY00Z PIKE 1064E (4-port SAS support Firmware RAID 0,1,1E)
90-C1SCN5-00UAY10Z PIKE 1078 (8-port SAS support Hardware RAID 0,1,10,5,50,6,60)
90-C1SDB0-00XBN00Z
90-C1SDB0-00XBN00Z
(10 in 1)
PIKE 6480 (8-port SAS support Firmware RAID 0,1,10,5)
90-C1SCU0-00UAY00Z PIKE 1068E (8-port SAS support Firmware RAID 0,1,1E)
90-C1SE10-00UAY00Z PIKE 2008 (8-port SAS 6G support Firmware RAID 0,1,1E)