IMC Networks IE-MiniFiberLinX-II 856-19717 用户手册

•

Preserves complete end-to-end fiber

connection integrity

•

Bi-directional bandwidth control

•

Read/write IEEE 802.1Q VLAN-tags

•

Supports Extra Tagging (Q-in-Q)

•

Supports passive 802.3ah OAM

(Operation, Administration &

Management)

•

QoS: IEEE 802.1p-based packet

prioritization (2 queues [high/low] with

8 levels of priority)

•

Layer 2 packet switching, store and

forward operation

•

Forwarding rate: 14,881 pps for 10 Mbps;

148,810 pps for 100 Mbps

•

AutoCross for MDI/MDIX

•

Features Auto Negotiation and Selective

Advertising

•

Supports Half and Full-Duplex operation

•

MTU: Supports over-sized packets up to

1916 bytes per packet

•

Password Control

•

Multiple Access Levels: User Assigned

Accounts & Access Levels

•

SNMP V1 and V2c compatible

•

Includes GUI-based iView² software for

remote management and upgrades

•

Monitors far-end (remote) status without a

physical presence or separate connection

•

IEEE 802.3x Flow Control

•

Includes DHCP and TFTP clients

•

Supports Telnet

•

Includes loopback test modes

(MAC swap)

•

Includes LinkLoss and FiberAlert

•

Supports the Unified Management Agent

(UMA)

•

Includes status LEDs

•

RS-232 (Craft) interface for local

management

•

Serial cable for direct connection to a

PC’s Serial Port

•

IEEE 802.3i 10Base-T twisted pair

•

IEEE 802.3u 100Base-TX twisted pair

•

IEEE 802.3u 100Base-FX or SX fiber

Network  operators  can  deploy  a  single

IE-MiniFiberLinX-II in stand-alone applications. At

the  Central  Office  (CO),  a  fiber  switch  connects

via  a  fiber  cable  to  the  IE-MiniFiberLinX-II  at  the

customer premises. The IE-MiniFiberLinX-II can be

managed from the CO over SNMP or Telnet.

The  IE-MiniFiberLinX-II  is  very  versatile  and  offers

a  range  of  AC  and  DC  powering  options.    It

also  supports  802.3af  powering  functionality,

allowing  it  to  act  as  a  Powered  Device  (PD).

The  IE-MiniFiberLinX-II  can  be  powered  from  a

PSE-enabled  wireless  Access  Point,  which  in  turn

can  be  powered  by  a  remote  source  such  as

the  solar  panels  on  a  street  light.    The  data  is

transmitted over fiber to an iMediaChassis/20 with

iMcV  modules  in  the  Central  Office  to  form  an

end-to-end managed system.

•

50/125µm or 62.5/125µm multi-mode fiber

•

9/125µm single-mode fiber

•

Single-strand fiber or CWDM

Connectors: RJ-45, and ST or SC

Shipping Weight: 0.30 lbs (0.11 kg)

Dimensions:  0.83”H x 1.80”W x 3.35”D

(2.11 x 4.57 x 8.51 cm)

•

Humidity: 5% - 95% (non-condensing)

•

Operating Temperature: -4° to +167° F

(-20° to +75° C) excluding AC wall adapter;

with AC wall adapter:

+32° to +122° F (0° to +50°C)

•

Storage Temperature:

-49° to +185° F (-45° to +85° C)

•

DC Input Voltage:

750mA @ 5V to 75mA @ 50 VDC

•

IEEE 802.3af Power over Ethernet