ASUS VivoMini UN45 用户手册

下载
页码 76
VivoMini UN Series
21
Your VivoMini comes with two SO-DIMM memory slots that allow 
you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V 
DDR3L 204-pin SO-DIMMs for a maximum of 8 GB memory.
NOTE: The CPU model N3000 only has one DIMM memory slot.
IMPORTANT! 
•  It is recommended that you replace the memory modules
under professional supervision. Visit an ASUS service center for 
further assistance. 
•  Always install DIMMs with the same CAS latency. For optimal
compatibility, we recommend that you install memory 
modules of the same version or date code (D/C) from the same 
vendor. Check with the retailer to get the correct memory 
modules.
•  Refer to http://www.asus.com for the list of compatible DIMMs. 
You can only install 1.35 V DDR3L SO-DIMM to the VivoMini’s 
DIMM slots.
To install or upgrade the memory modules:
1.  Turn off your VivoMini then disconnect all cables and peripherals.
2.   Place the VivoMini on a flat stable surface, with its top side facing 
down. 
WARNING! 
•  Ensure that your hands are dry before proceeding with the rest
of the installation process. 
•  Before installing memory modules, use a grounded wrist strap
or touch a safely grounded object or metal object to avoid 
damaging them due to static electricity.
Upgrading memory modules