IMC Networks IE-MiniFiberLinX-II,TP-TX/SSFX-MM1550-SC 856-19761 用户手册
产品代码
856-19761
www.imcnetworks.com
800-624-1070
General
•
Preserves complete end-to-end fiber
connection integrity
•
Bi-directional bandwidth control
•
Read/write IEEE 802.1Q VLAN-tags
•
Supports Extra Tagging (Q-in-Q)
•
Supports passive 802.3ah OAM
(Operation, Administration &
Management)
•
QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with
8 levels of priority)
•
Layer 2 packet switching, store and
forward operation
•
Forwarding rate: 14,881 pps for 10 Mbps;
148,810 pps for 100 Mbps
•
AutoCross for MDI/MDIX
•
Features Auto Negotiation and Selective
Advertising
•
Supports Half and Full-Duplex operation
•
MTU: Supports over-sized packets up to
1916 bytes per packet
Security
•
Password Control
•
Multiple Access Levels: User Assigned
Accounts & Access Levels
Management
•
SNMP V1 and V2c compatible
•
Includes GUI-based iView² software for
remote management and upgrades
•
Monitors far-end (remote) status without a
physical presence or separate connection
•
IEEE 802.3x Flow Control
•
Includes DHCP and TFTP clients
•
Supports Telnet
•
Includes loopback test modes
(MAC swap)
•
Includes LinkLoss and FiberAlert
•
Supports the Unified Management Agent
(UMA)
•
Includes status LEDs
•
RS-232 (Craft) interface for local
management
•
Serial cable for direct connection to a
PC’s Serial Port
Ethernet Types Supported
•
IEEE 802.3i 10Base-T twisted pair
•
IEEE 802.3u 100Base-TX twisted pair
•
IEEE 802.3u 100Base-FX or SX fiber
Technical Specifications
Network operators can deploy a single
IE-MiniFiberLinX-II in stand-alone applications. At
the Central Office (CO), a fiber switch connects
via a fiber cable to the IE-MiniFiberLinX-II at the
customer premises. The IE-MiniFiberLinX-II can be
managed from the CO over SNMP or Telnet.
The IE-MiniFiberLinX-II is very versatile and offers
a range of AC and DC powering options. It
also supports 802.3af powering functionality,
allowing it to act as a Powered Device (PD).
The IE-MiniFiberLinX-II can be powered from a
PSE-enabled wireless Access Point, which in turn
can be powered by a remote source such as
the solar panels on a street light. The data is
transmitted over fiber to an iMediaChassis/20 with
iMcV modules in the Central Office to form an
end-to-end managed system.
Typical Application— Single
IE-MiniFiberLinX-II Solution
Application Examples
(cont.)
Typical Application— Powering
Options
NID Application
Networking
RoHS Compliant
Fiber Types Supported
•
50/125µm or 62.5/125µm multi-mode fiber
•
9/125µm single-mode fiber
•
Single-strand fiber or CWDM
Connectors: RJ-45, and ST or SC
Shipping Weight: 0.30 lbs (0.11 kg)
Dimensions: 0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
Environmental
•
Humidity: 5% - 95% (non-condensing)
•
Operating Temperature: -4° to +167° F
(-20° to +75° C) excluding AC wall adapter;
with AC wall adapter:
+32° to +122° F (0° to +50°C)
•
Storage Temperature:
-49° to +185° F (-45° to +85° C)
Power
•
DC Input Voltage:
750mA @ 5V to 75mA @ 50 VDC
•
IEEE 802.3af Power over Ethernet
Physical Specifications