ASUS VivoMini UN45 用户手册

If your VivoMini is unresponsive, press and hold the power button 

for at least four (4) seconds until your VivoMini turns off.

To put your VivoMini on Sleep mode, press the Power button once.

To quickly enter the BIOS:
•  Press the power button for at least four (4) seconds to shut down

your VivoMini, then press the power button again to turn your 

VivoMini back on, then press <F2> or <Del> during POST.

•  When your VivoMini is off, disconnect the power cord from your

VivoMini’s power connector. Reconnect the power cable and 

press the power button to turn on your VivoMini. Press <F2> or 

<Del> during POST.

NOTE: POST (Power-On Self Test) is a series of software controlled 

diagnostic tests that run when you turn on your PC.

BIOS (Basic Input and Output System) stores system hardware 

settings that are needed for system startup in the VivoMini. 
In normal circumstances, the default BIOS settings apply to most 

conditions to ensure optimal performance. Do not change the 

default BIOS settings except in the following circumstances: 
•  An error message appears on the screen during the system

bootup and requests you to run the BIOS Setup.

•  You have installed a new system component that requires further

BIOS settings or update.

WARNING! Inappropriate BIOS settings may result to instability 

or boot failure. We strongly recommend that you change the BIOS 

settings only with the help of a trained service personnel.