ASUS RS700-E8-RS4 V2 用户指南

Chapter 2: Hardware Information

2-14

The system supports four hot-swap SATA/SAS hard disk drives. The hard disk drive installed 

on the drive tray connects to the motherboard SATA/SAS ports via the SATA/SAS backplane.
To install a hot-swap SATA/SAS HDD:

1.

Push the spring lock to the right (A) then pull the tray lever outward (B) to release the

drive tray. The drive tray ejects slightly after you pull out the lever.

2. 

Firmly hold the tray lever and pull the 

drive tray out of the bay.

3.

Place the drive tray on a flat and

stable surface.

4. 

Prepare the SATA/SAS HDD and the 

bundled set of screws.