ASUS STRIX SOAR 用户手册

25

ASUS STRIX Sound Card Series User Manual

• 

STRIX sound card series PCI Express audio card needs the power 

cable to supply addition power in addition to the basic PCI Express 

bus power. Please double check you have plugged the small 4-pin 

power plug onto STRIX sound card series power connector. If you did 

not plug the internal power, STRIX Sound Card Series Audio Center 

will remind you a warning message and won’t allow your operation 

when you double click STRIX Sound Card Series Audio Center icon in 

the system tray.

• 

Please ensure that you have connected speakers properly and have 

powered on your speakers

• 

Please ensure that the device master volume or the software player 

has NOT been muted on the STRIX Sound Card Series Audio Center

• 

If you are using Dolby Digital Live encoder through the S/PDIF output, 

the analog output will be muted to get rid of the interference between 

your digital speaker system and analog speakers or headphones. 

Please check if this is the case.

• 

Please go to the sound and audio device of Windows Control Panel 

to check if the playback default device is set to STRIX Sound Card 

Series Audio Device, instead of other onboard AC97 or HDA codec 

device. If it’s not, please set it to STRIX Sound Card Series Audio 

Device and restart your applications.

• 

Please try restart your Windows.

• 

Please ensure that you have enabled S/PDIF output in the Audio Center 

GUI (Main page)

• 

Please ensure that you are connecting the correct S/PDIF output jack 

on the card to the decoder’s (AV receiver) S/PDIF input jack

• 

You may need to select the correct input and mode of your decoder or 

AV receiver. For Dolby Digital or DTS output, you may have to double 

check that the AV receiver is in that decoding mode.

• 

If you are using 192KHz PCM output, please make sure your decoder 

can support 192KHz decoding. Try changing it to 44.1K or 48KHz first.