ASUS PEB-10G/57840-2T 用户指南
![ASUS](https://files.manualsbrain.com/attachments/bcce124c856b7e3d3d300f71ffaf1ffd9cfb979e/common/fit/150/50/ec53845de541d4cc27fb3d5bf058071769d4e90f586d828791d606ffeae5/brand_logo.png)
2-8
第二章:Boot Agent 設置
2.1.4 NIC Partition 設置菜單
Flow Control [Tx/Rx Flow Control]
設置值有: [Tx/Rx Flow Control] [Disabled] [Auto] [Tx: Send Pause
on Rx Overflow] [Rx: Throttle Tx on Pause Received]
PF#0/2/4/6
選擇一個項目設置其 NIC Partition 參數。
C(P) Eth
Reset Configuration to Default
選擇此項目並按下 <Enter>,將此卡上所有端口的 NIC Partition 恢復
為出廠默認值。
Comprehensive Configuration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
Flow Control :
Tx/Rx Flow Control
PF#0 L2=00:E0:18:09:05:2C(P) Eth
PF#2 L2=00:E0:18:09:05:30(P) Eth
PF#4 L2=00:E0:18:09:05:34(P) Eth
PF#6 L2=00:E0:18:09:05:38(P) Eth
Reset Configuration to Default
NIC Partition Configuration
Configure Physical Port Flow Control
[←|→][Enter][Space]:Scroll Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7