ASUS ESC8000 G3 用户手册

ASUS ESC8000 G3

6-31

Select a destination disk with the same size as the original hard disk.

This option is only for the RAID 1 set.

If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays

the status of the RAID volume as “Degraded” during POST. You can rebuild the RAID array

with other installed non-RAID disks.
To rebuild the RAID with other non-RAID disk:

1.

During POST, press <Ctrl>+<I> at the prompt to enter the Intel Rapid Storage

Technology option ROM utility.

2.

If there is a non-RAID SATA Hard Disk available, the utility will prompt you to rebuild

the RAID. Press the up/down arrow keys to select the destination disk then Press

<Enter> to start the rebuilding process, or press <ESC> to exit.

To exit the utility:

1.

From the utility main menu, select 4. Exit then press <Enter>.

2.

Press <Y> to exit or press <N> to return to the utility main menu.