Canon DIGISUPER 95 手册

E8

E9

2  PREPARATION

  Remove the lens shroud from the lens body.

  Check that DIP switch (iris control select switch) SW2 

No. 4 is set to the “OFF” position (I.CAMERA). 
Depending on the command signals from the camera, 
the iris would not be set to auto iris mode although 
the switch was set to the “OFF” position. For details, 
refer to the “Iris mode” table in 2-5 “Iris Mode Setting 
(Option)”.

  Turn the iris gain adjusting trimmer for the gain 

adjustment. To increase the gain, turn the trimmer 
clockwise. To decrease the gain, turn the trimmer 
counterclockwise.

Iris Gain Adjusting 

Trimmer

DIP Switch

  Perform “Trimmer Adjustment” steps 

1 and 2.

  Information display operation procedure:

a.  Push the DISPLAY switch to bring up the display.

(a)

b.  When the screen starts flushing by pushing the 

cursor button, move the 

 (left) or 

 (right) 

cursor button until the value to be set appears on 
the screen.

Selection item

 

01 

– 

99

Function

Minimum gain

Maximum gain

Default value: 50

I G :    50

I G :    51

(b)

(b)

•  To perform the gain adjustment while checking the iris 

operation, set the iris mode of the camera to the [AUTO] 
position.

•  To determine the maximum gain, set the trimmer at a level 

where no hunting occurs.

c.  Push the cursor button. This completes the 

adjustment.

(c)

For the detailed setting method, refer to the “

Operation Manual” at the end of this Operation Manual.

DISPLAY 

switch

Information Display

Cursor 

button