Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Canon
  4. imagePROGRAF iPF670 MFP L24
  5. 手册

Canon imagePROGRAF iPF670 MFP L24 手册

下载
页码 共 132
Cause
Corrective Action
The Printhead is set too low in the
Control Panel menu.
In the Control Panel menu, set Head Height to Automatic.
 (See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
You are printing on heavyweight pa-
per or paper that curls or wrinkles
easily after absorbing ink.
For paper-based media such as Heavyweight Coated Paper, set the VacuumStrngth to
Strong or Strongest in the Control Panel menu. If the paper still rubs against the printhead,
set the Head Height in the Control Panel menu to a higher value than the current setting.
 (See "Adjusting the Vacuum Strength.")
➔
User's Guide
 (See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
For film-based media such as Tracing Paper, set the VacuumStrngth to Standard, Strong
or Strongest in the Control Panel menu. If the paper still rubs against the printhead, set the
Head Height in the Control Panel menu to a higher value than the current setting.
 (See "Adjusting the Vacuum Strength.")
➔
User's Guide
 (See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
The Ejection Guide is soiled.
Clean the Ejection Guide.
 (See "Cleaning the Printer Exterior.")
➔
User's Guide
The surface of the paper is dirty
The surface of the paper is dirty
Cause
Corrective Action
The Paper Retainer is soiled.
Clean the Paper Retainer.
You are using a paper that
does not dry easily.
In the Control Panel menu, set Roll DryingTime to at least 1 min.
 (See "Menu Settings.")
➔
User's Guide
When paper that does not dry easily is used for printing, it may curl during printing and touch the
Output Tray.
In this case, in the Control Panel menu, complete the settings for Dry time and Area in Scan Wait
Time.
However, note that printing will now take longer.
 (See "Menu Settings.")
➔
User's Guide
The back side of the paper is dirty
The back side of the paper is dirty
Cause
Corrective Action
The Platen has become dirty after borderless
printing or printing on small paper.
Open the Top Cover and clean the Platen.
The Platen has become soiled because you
have set Width Detection to Off in the Control
Panel menu.
Set Width Detection to On in the Control Panel menu, and then open the Top
Cover and clean the Platen.
Open the Top Cover and clean the Platen. After this, manually advance the roll
onto the Platen before printing.
 (See "Feeding Roll Paper Manually.")
➔
User's Guide
The Paper Retainer is soiled.
Clean the Paper Retainer.
BordlessOversize is set to Standard in the
Control Panel menu.
Set BordlessOversize to Little in the Control Panel menu.
 (See "Menu Settings.")
➔
User's Guide
Printed colors are inaccurate
Printed colors are inaccurate
Cause
Corrective Action
Color adjustment has not been activated in the
Advanced Settings of the printer driver.
In the Advanced Settings of the printer driver, access Color Settings in Color
Mode to adjust colors.
 (See "Main Sheet (Windows).")
➔
User's Guide
 (See "Main Pane (Mac OS).")
➔
User's Guide
Colors have not been adjusted on the computer
or monitor.
Refer to the computer and monitor documentation to adjust the colors.
iPF670 Series
                                                                                                                                                             
The surface of the paper is dirty
   
Troubleshooting
Problems with the printing quality
97