Canon imagePROGRAF iPF6450 手册

3

Install the 12 ink tanks.

Attach the Ink Tanks

Press the Power button to turn on the 

printer.

When the following screen appears, use 

the ▲ and ▼ keys to select a language 

and press OK.

㪈㪆㪉

Language

English

ᣣᧄ⺆
Français
Italiano
Deutsch

Select your local time zone and press 

OK.

㪈㪆㪌

Time Zone

0:London   (GMT)

+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow   
+4:Eerevan,Baku

The procedure for attaching the Ink Tanks 

(guidance) is displayed on the display. 

Open the Ink Tank Cover by grasping the 

handles according to the display.

While pressing the stopper of the ink tank 

lock lever inwards, open the ink tank lock 

lever upwards.

Shake each ink tank gently 7 to 8 times 

before opening its pouch.

• Failure to shake the ink tanks may 

result in reduced print quality because 

ink ingredients have settled on the 

bottom of the tank.

Open the pouch and remove the ink tank.

• Never touch the ink holes (a) 

or metal contacts (b). Touching 

these parts may cause stains, 

damage the ink tank, and 

affect print quality.

a

b

• Avoid dropping the ink tank after 

removing it from the pouch. Otherwise, 

ink may leak and cause stains.

• Do not remove ink tanks to shake them 

after they have been installed. Doing so 

may cause ink to spill.

Insert the ink tank into the holder oriented 

as shown, with the ink holes down.

• If the ink tank does not fit in the holder, 

make sure the color of the ink tank lock 

lever matches the color of the ink tank, 

and check the orientation of the ink 

tank.

Close the ink tank lock lever until it clicks 

into place. Make sure the ink lamp lights 

red.

• If the ink lamp is not lit, repeat steps 5 

and 9.

MEMO

• After you have finished attaching the 

ink tanks, it may take up to 2 minutes 

before the Ink Lamp lights up.

Repeat steps 5 to 9 to attach each of the 

Ink Tanks.

Close the ink tank cover.