Canon VB-M641V 手册

Plenum Mounting Kit 
SR640-P-VB Installation Guide

This camera is for indoor use only. This “Installation Guide” 

explains the installation method using the Plenum Mounting Kit 

SR640-P-VB. Be sure to read the “Safety Precautions” section 

for correct use. After reading this Installation Guide, keep it in a 

readily accessible location for future reference.
In addition to this “Installation Guide”, please also read the 

“Installation Guide” included with the camera.

 

Caution

   Request a professional installer for all 

installation work. Never try to install the 

camera yourself. Doing so may result in 

unforeseen accidents such as dropping 

the camera or electric shock.

This Installation Guide uses the following symbols to indicate 
important information the user should know in order to use the 
product safely. Explanations are provided for each symbol so that 
users will understand the level of importance for each. Be sure to 
observe these items.

 

Failure to follow the instructions 

accompanied by this symbol may result in 

death or serious injury.

 

Failure to follow the instructions 

accompanied by this symbol may result in 

injury.

Failure to follow the instructions 

accompanied by this symbol may result in 

property damage. 

 Important

This symbol indicates important or 

restricted items.

 Note

Contains reference information for 

operation or additional explanations.

 

Do not install in the following places:

 

•  Places in direct sunlight, near heat-generating objects, or 

subject to high temperatures 

•  Places near fire sources or flammable solvents (alcohol, 

thinner, fuel, etc.)

•  Humid or dusty places 

•  Places subject to oily smoke or steam 

•  Places subject to sea air

•  Confined or enclosed places

Failure to do so may result in fire or electric shock.

Notes on Power Supply

•  Only use the dedicated AC Adapter (sold separately) for 

AC power.

•  Do not set any heavy objects on the power cable (or the 

LAN cable for a PoE power supply).

•  Do not pull, forcibly bend, scratch, or modify the power 

cable (or the LAN cable for a PoE power supply).

•  Do not cover or wrap the AC adapter (sold separately) with 

cloth or blankets.

Failure to do so may result in fire or electric shock.

Be sure to read the user manual for the dedicated AC 

adapter (sold separately) before use.

 

For installation or inspection of this camera, consult the 

dealer where you purchased the product.

 

•  This installation should be made by a qualified service 

person and should conform to all local codes. 

•  When installing, make sure the surface is capable 

of withstanding the total weight of the camera and 

accessories, and that it is sufficiently reinforced.

•  Periodically check the parts and screws for rust and 

loosening, in order to prevent injuries and equipment 

damage due to falling items.

•  Do not install in unstable places, places subject to 

significant vibration or impact, or places subject to salt 

damage or corrosive gas.

•  Be sure to attach the safety wire when installing the 

camera.

•  Use only with compatible cameras.

•  If a ceiling plate thickness is not between 5.0 and 40.0 mm, 

do not use it.

Failure to do so may result in the camera falling or other 
accidents.

•  Do not touch the edges of the metal parts with bare hands.

•  Take care not to catch your fingers when installing.

Failure to do so may result in injuries.

•  Do not move the lens unit by hand.

•  Do not install on an unstable surface. Also, make sure the 

camera is less than ±5° off horizontal.

•  After turning off the power, do not turn the power on again 

for at least five seconds.

•  Take measures to remove static electricity before 

performing any procedures.

•  If there is condensation, please wait to power on, until the 

condensation dissipates. 

Failure to do so may result in malfunctions.

•  Take care not to damage wiring or piping.

Failure to do so may result in damage to peripheral items.

 

•  If you discover defective conditions such as smoke, 

strange sounds, heat or strange odors, immediately stop 

using the camera and contact your nearest dealer.

Fire or electric shock may result from continued use of the product.

•  If thunder starts, stop installation or inspection etc. and do 

not touch the camera or continue connecting the cable.

•  Do not disassemble or modify the camera.

•  Do not damage the connecting cable.

•  Do not spray the camera with water, or otherwise make it 

wet.

•  Do not insert foreign objects such as water or metal into 

the camera.

•  Do not use flammable sprays near the camera.

•  Do not leave LAN cables, external power supply, or the 

power connector for the AC adapter (sold separately) 

connected when the camera is not in use for long periods.

•  Do not use flammable solvents such as alcohol, paint 

thinner or benzine when cleaning the camera.

Failure to do so may result in fire or electric shock.

Model 

SR640-P-VB 

Weight 

Approx. 2250 g (4.97 lb.) (Plenum Mounting Unit, Recessed 

Mounting Cover)

The contents of this guide are subject to change without any 

prior notice.

159 (6.26)

223 (8.78)

21 (0.83)

    192

 (  7.56)

  226 (  8.90)

Unit: mm (in.)

Perform camera settings by using the software on the 
Setup CD-ROM (please refer to the “Operation Guide”).
Attach the Ceiling Plate that is included with the camera 
to the Plenum Mounting Unit.

    

❷

❸

❹

❶

❶

Dedicated wrench 

included with camera

          

M4 × 4

Screws 

(included)

BIE-7075-000

© CANON INC. 2015 

Printed in Japan

This product comes with the following items. If any item is missing, 

contact the dealer where you purchased the product.

Plenum Mounting Unit  

Recessed Mounting Cover

Template 

Screws (M4) x 4

Installation Guide (This document)