Canon imagePROGRAF iPF6400S 手册
4
Press ▲ or ▼ to select Roll Length, and then press the OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
Specify the roll length as follows.
1.
Press the
◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.
Removing the Roll from the Printer
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Important
•
Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer
will be unable to keep track of the amount of roll paper left.
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
will be unable to keep track of the amount of roll paper left.
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
Note
•
If you need to cut the roll,
•
The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectropho-
tometer Unit (option). If it is difficult to remove from the front of the printer, lowering the Up-down Unit may make the
operation easier from the front of the printer.
tometer Unit (option). If it is difficult to remove from the front of the printer, lowering the Up-down Unit may make the
operation easier from the front of the printer.
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the
( Paper tab) .
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is rewound.
The roll is rewound.
Important
•
If you have selected ManageRemainRoll > On in the
Control Panel menu, a barcode is printed on the lead-
ing edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left.
Control Panel menu, a barcode is printed on the lead-
ing edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left.
Removing the Roll from the Printer
iPF6400S
Handling and Use of Paper
Handling rolls
510