Canon VB-H43 手册

Intelligent Function Setting Tool

121

A

d

min T

ool
s

Setting a detection area using [Quick setting]
[Quick setting] can be configured for [Removed Object 

Detection] only.

The background video is created.

An outline for the detection object is drawn using a 

polygon with up to 32 points.

If there are multiple detection objects, the area is 

drawn around the largest object.

• Drag the square marks (

■

) at each angle to change the shape 

of the polygon. 

• Click [Clear] to delete the polygonal detection area.

• The camera tampering detection area cannot be changed.

Changing a [Rectangular] detection area into a [Polygonal] 
shape or changing a [Polygonal] detection area into a 
[Rectangular] shape

Changing the shape of the detection areas already set 

deletes that area and switches to a new drawing setting.

„ Setting the Detection Line

Use the video display area to set the detection line. 

Specify a detection line consisting of a polygonal line with 

a maximum of 32 angles.

In the video display area, click the start point of the 

detection line and then click the end point. To create a 

detection line consisting of polygonal line, click each 

angle in the polygonal line in order.

To confirm a detection line, click any of the already set 

angles.

The angles in a confirmed detection line can be dragged 

to change the shape of a detection line and lines between 

angles can be dragged to change the position of the 

detection line.

• Drag the square marks (

■) at each angle to change the shape 

of the detection line.

• Click [Clear detection line] to delete a detection line.

„ Setting Detection Criteria per Detection Type

Specify different detection criteria for each detection type.

Set detection areas where you want to detect moving 

objects.

For [Object Size (%)], enter a value or move the slider to 

set the ratio of the size of an object moving in the 

detection area to the size of the detection area.

When the ratio of an area where the camera has detected 

a moving object exceeds the value set for [Object Size 

(%)], detected mode is triggered to ON.

When [Object Size (%)] is changed, an indicator frame 

showing the size of the object is displayed for 1 second in 

the center of the video display area, allowing specification 

of the settings while checking the size ratio.

Any moving objects detected are shown with contour lines.

If a moving object is smaller than [Object Size (%)], its 

contour lines are white. If the moving object is larger than 

[Object Size (%)], its contour lines take on the same color 

as the detection area, indicating that “detection” mode has 

been triggered to ON.

Temporarily remove the object whose removal you 
want to detect from the video display area. 

Click [Restart intelligent function].

Replace the object whose removal you want to detect 
in its original position.

Click [Quick setting].

Click [Restart intelligent function] again.

Configured detection 
area

Object size indicator

Detection area