Canon PowerShot SX620 HS Black 手册

104

Connect two cameras via Wi-Fi and send images between them as 

follows.

 

●

Only Canon-brand cameras equipped with a Wi-Fi function can be 

connected to wirelessly. You cannot connect to a Canon-brand camera 

that does not have a Wi-Fi function, even if it supports Eye-Fi/FlashAir 

cards.

 

●

Press the [ ] button.

 

●

Press the [ ][ ][ ][ ] buttons to choose 

[ ], and then press the [ ] button.

 

●

Press the [ ][ ] buttons to choose [Add 

a Device], and then press the [ ] button.

 

●

Follow steps 1 – 3 on the target camera 

too.

 

●

Camera connection information will be 

added when [Start connection on target 

camera] is displayed on both camera 

screens.

 

●

Connections require that a memory card with saved images be in 
the camera.

 

●

Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by pressing the [ ][ ] buttons to 
choose the device and then pressing the [ ] button. To add a 
new device, display the device selection screen by pressing the 
[ ][ ] buttons, and then configure the setting.

 

●

If you prefer not to display recent target devices, choose MENU 
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► 
[Target History] ► [Off].

 

●

To connect without entering a password in step 4, choose MENU 
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] 
► [Password] ► [Off]. [Password] is no longer displayed on the 
SSID screen (in step 3).

 

●

To use another access point, follow steps 3 – 4 in “Using Another 
Access Point” (= 93).