Canon Wireless File Transmitter WFT-E8A 手册

49

Batch Transfer



Turn the <5> dial to select the 
image to be transferred, then press 
<0>.



Turn the <5> dial to display the [X] 
on the screen’s upper left, then press 
<0>.



If you press the <u> button and turn 
the <6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the <6> dial 
clockwise.



To select other images to be 
transferred, repeat step 4.



Select [FTP transfer], then press 
<0>.



Select [OK] on the confirmation 
dialog to transfer the image.



Images selected with [Sel.n] and 
[All image] can also be transferred in 
this way.

If you set the Live View shooting/Movie shooting switch to <k> during the 
image transfer of captured images, the image transfer will be temporarily 
cancelled. Set it to <A> to resume the image transfer.



You can also transfer shot movies. However, when the Live View 
shooting/Movie shooting switch is set to <k>, images cannot be 
transferred. Set it to <A> and transfer them.



Up to 9,999 images can be selected in one batch.



When [Sel.Image] is selected, you can check the transfer history on the 
upper left of the screen: No mark: Not selected. X: Selected for transfer. 
l: Transfer failed. k: Transfer succeeded.



The procedures for [RAW+JPEG transfer] (p.51) and above steps 1 to 4 
can also be performed even while the camera is not connected to an 
FTP server.