Canon KH13x4.5 KRSD 产品宣传册
F-Number
2/3” Lens
KJ20x8.5B LO32BMT
Zoom Ratio: 20x
Wide Focal Length: 8.5mm
F-Stop: F1.8
1/2” HD Lens
KH20x6.4
Zoom Ratio: 20x
Wide Focal Length: 6.4mm
F-Stop: F1.4
2/3” HD Lens
KJ20x8.5B with LO-32BMT
Zoom Ratio: 20x
Wide Focal Length: 8.5mm
F-Stop: F1.8
1/2”
Lens
Since neither the focal length nor the effective aperture has changed, the F-number remains the same,
F1.8. Thus, there is no optical sensitivity “loss” involved when using a 2/3” native lens with the LO-32BMT
on a 1/2” camera. As a comparison, if instead of using the 2/3” KJ20x8.5B lens and LO-32BMT adapter,
you were to substitute a 1/2” KH20x6.4 HDTV lens, the adapter would no long be necessary. By applying
the same formula, F-Number = f/D, to the 1/2” KH20x6.4 lens, the lens will have a faster F-Number, F1.4,
compared to the 2/3” lens and LO-32BMT combination.
Focal Length
When using a 2/3” lens with a LO-32BMT adapter mounted to a 1/2” camera, the actual focal length
of the lens does not change. However, the angle of view associated with that focal length changes.
In this case, the lens will visually be more telephoto, by a factor of 1.38x. As an example, the 2/3”
KJ20x8.5B HDTV lens (58.9
0
angle of view at 8.5mm when mounted on a 2/3” camera) will visually
appear to have a 44.6
0
angle of view, that equates to an equivalent focal length of 11.7mm
(8.5mm x 1.38 = 11.7mm)
The actual F-Number of a lens does not change when mounted on a different format size camera.
Using the 2/3” KJ20x8.5B HDTV lens as an example, its maximum aperture is F1.8. When that lens is
mounted on the 1/2” camera with the LO-32BMT adapter, the focal length and effective aperture of
the lens do not change.
The Canon LO-32BMT adapter allows you to mount a 2/3” B4 bayonet lens onto
any Sony 1/2” proprietary mount camera such as the new XDCAM HD series,
PDW-F330/F350 while not affecting the optical quality of the lens. It is important to consider
the following information when using a 2/3” lens with a LO-32BMT adapter mounted to a 1/2” camera.
2/3” HD Lens
KJ20x8.5B Focal Length
at Wide Angle
8.5mm
2/3” HD Camera
Angle of View
58.9
0
1/2” HD Camera
Angle of View
with LO-32BMT
44.6
0
Visual Equivalent
Angle of View
in 2/3”
11.7mm
The formula for deriving the F-Number of any lens is as follows:
F-Number = f / D
f = Focal Length D = Effective Aperture
Canon’s
New HDgc Lenses
for Sony’s XDCAM HD
Canon USA Inc.
Broadcast and Communications Division
65 Challenger Road, Ridgefield Park, NJ 07660
1-201-807-3300 / 1-800-321-4388
1-201-807-3300 / 1-800-321-4388
bctv@cusa.canon.com
www.canonbroadcast.com
1. The images produced will appear visually more telephoto by a factor of 1.38x.
2. The actual F-Number of a lens does not change when mounted on a different format size camera.
If the lens is F1.9 in the 2/3” format, the lens is also F1.9 in the 1/2” format.
3. The Focal Length and F-Stop markings on the 2/3” lens are correct in either format.
4. It is highly recommended that HDTV lenses always be employed on HDTV cameras.
The Canon LO-32BMT
•2007
The 2/3” KJ20x8.5B lens
with LO-32BMT as compared
to the 1/2” KH20x6.4 lens.
2/3” HD Camera Angle of View
58.9
0
1/2” HD Camera Angle of View
with LO-32BMT
44.6
0
Specifications subject to change without notice. Errors and omissions excepted.
Weight and dimensions are approximate.
CNB3000-xxxx-xx
©2007 Canon U.S.A., Inc. All rights reserved. Canon is a registered trademark of Canon Inc. in the United States and
may also be a registered trademark or trademark in other countries. IMAGEANYWARE is a trademark of Canon.