Canon PowerShot SX710 HS 手册
115
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
3
Choose [ ].
●
Press the [
][
][ ][ ] buttons or turn
the [
] dial to choose [
], and then
press the [
] button.
4
Choose [Add a Device].
●
Press the [
][
] buttons or turn the [
]
dial to choose [Add a Device], and then
press the [
press the [
] button.
5
Choose [WPS Connection].
●
Press the [
][
] buttons or turn the [
]
dial to choose [WPS Connection], and
then press the [
then press the [
] button.
6
Choose [PBC Method].
●
Press the [
][
] buttons or turn the [
]
dial to choose [PBC Method], and then
press the [
press the [
] button.
7
Establish the connection.
●
On the access point, hold down the WPS
connection button for a few seconds.
connection button for a few seconds.
●
For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
checking settings, refer to the access point user manual.
●
A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
●
This guide refers to all Wi-Fi routers and base stations as “access
points”.
points”.
●
If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU (= 28)
► [ ] tab ► [Wi-Fi Settings] ► [Check MAC Address].
to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU (= 28)
► [ ] tab ► [Wi-Fi Settings] ► [Check MAC Address].
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
Method for settings on a WPS supported device.
1
Confirm that the computer is
connected to an access point.
●
For instructions on checking the
connection, refer to the device and
access point user manuals.
connection, refer to the device and
access point user manuals.
2
Access the Wi-Fi menu.
●
Press the [
] button to turn the camera
on.
●
Press the [
] button.
●
If the [Device Nickname] screen is
displayed, press the [
displayed, press the [
][
] buttons or
turn the [
] dial to choose [OK], and then
press the [
] button.