Canon PowerShot SX710 HS 手册
18
Before Use
Basic Guide
Advanced Guide
Camera Basics
Index
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Removing the Battery Pack and Memory Card
Remove the battery pack.
●
Open the cover and press the battery
lock in the direction of the arrow.
lock in the direction of the arrow.
●
The battery pack will pop up.
Remove the memory card.
●
Push the memory card in until it clicks,
and then slowly release it.
and then slowly release it.
●
The memory card will pop up.
3
Check your card’s write-protect
switch and insert the memory card.
●
Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
●
Insert the memory card with the terminals
(2) facing as shown until it clicks into
place.
(2) facing as shown until it clicks into
place.
●
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
●
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
you slide it, until it clicks into the closed
position (2).
●
For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (
saved on one memory card, see “Number of Shots per Memory
Card” (
(1)
(2)
(1)
(2)