Canon PowerShot SX600 HS Red 手册

106

z

z

Connect to the smartphone as described 

in steps 5 – 9 in “Connecting to WPS-

Compatible Access Points” (

) or 

steps 4 – 6 in “Connecting without an 

).

z

z

After a connection is established with the 

smartphone, the smartphone nickname 

is displayed on the camera. (This screen 

will close in about one minute.)

z

z

You can now use the smartphone to 

import images from the camera. (The 

camera cannot be used to send images 

to the smartphone.)

z

z

Use the smartphone to end the 

connection; the camera will automatically 

turn off.

z

z

From now on, you can simply press the 

<

{> button to connect to the registered 

smartphone.

When you are in the vicinity of an access point that you have 

previously connected to, the camera will automatically connect 

to it in step 2. To change access points, select [Switch Network] 

from the screen that will be displayed when the connection is 

being established, and follow steps 5 – 9 in “Connecting to WPS-

Compatible Access Points” (

).

All images in the camera can be viewed from the connected 

smartphone. Note that if you have assigned the <

{> button, 

[View Settings] (

One smartphone can be registered to the <

{> button. If you wish to register a 

different smartphone, clear the one currently registered (

) first.

Using the <{> Button

Once you have registered a smartphone or Image Sync (

the <

{> button, you can connect to the registered destination simply by 

pressing the <

{> button.

Registering a Smartphone to the <{> Button

Once you have connected to a smartphone initially via Wi-Fi by pressing the 

<

{> button, you can simply press the <{> button after that to connect again 

for viewing and saving camera images on connected devices.

  Press the <{> button.

z

z

Press the <

q><r> buttons to choose [{], 

and then press the <

m> button.