Canon PowerShot SX600 HS Red 手册

下载
页码 163
28
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images/Movies
If the camera is turned on while the <
p> button is held down, the 
camera will no longer sound. To activate sounds again, press the 
<
n> button and choose [Mute] on the [3] tab, and then press 
the <
q><r> buttons to choose [Off].
Still Images
A blinking [ ] icon warns that images are more likely to be blurred 
by camera shake. In this case, mount the camera on a tripod or take 
other measures to keep it still.
If your shots are dark despite the flash firing, move closer to the 
The subject may be too close if the camera only beeps once when 
you press the shutter button halfway. For details on the focusing 
To reduce red-eye and to assist in focusing, the lamp may be 
activated when shooting in low-light conditions.
A blinking [
h] icon displayed when you attempt to shoot indicates 
that shooting is not possible until the flash has finished recharging. 
Shooting can resume as soon as the flash is ready, so either press 
the shutter button all the way down and wait, or release it and press 
it again.
Although you can shoot again before the shooting screen is 
displayed, your previous shot may determine the focus, brightness, 
and colors used.
You can change how long images are displayed after shots (
).
Movies
The camera may become warm when shooting movies repeatedly 
over an extended period. This does not indicate damage.
Before shooting a movie, lower the flash 
with your finger. Be careful not to touch 
the microphone when shooting a movie. 
Leaving the flash raised, or blocking 
the microphone may prevent audio 
from being recorded or may cause the 
recording to sound muffled.
Avoid touching camera controls other than the movie button when 
shooting movies, because sounds made by the camera will be 
recorded.
Once movie recording begins, the image display area changes and 
subjects are enlarged to allow for correction of significant camera 
shake. To shoot subjects at the same size shown before shooting, 
adjust the image stabilization setting (
).
Audio recording is monaural.
Microphone