Canon PowerShot SX600 HS Red 手册

99

You can reconnect to any previous access points automatically by following 

step 4 in “Connecting to WPS-Compatible Access Points” (

).

To reconnect to the access point, confirm that the target device is already 

connected to it, and then follow the procedure from step 9. Note that this 

step is not required when connecting to Web services.

To switch access points, choose [Switch Network] on the screen 

displayed when you establish a connection, and then follow the 

procedure from step 5.

z

z

View the listed networks (access 

points) as described in steps 1 – 4 of 

“Connecting to WPS-Compatible Access 

Points” (

).

z

z

Press the <

o><p> buttons to choose a 

network (access point), and then press 

the <

m> button.

z

z

Press the <

m> button to access the 

keyboard, and then enter the password 

(

z

z

Press the <

o><p> buttons to choose 

[Next], and then press the <

m> button.

z

z

Press the <

o><p> buttons to choose 

[Auto], and then press the <

m> button.

z

z

If you selected [

{], [2], or [ ] as the 

target device, see “Connecting to WPS-

Compatible Access Points”, starting with 

step 9 (

z

z

If you selected a Web service as the 

destination, see “Connecting to WPS-

Compatible Access Points”, starting with 

).

To determine the access point password, check on the access point itself or 

refer to the user manual.

Up to 16 access points will be displayed. If no access points are detected, 

choose [Manual Settings] in step 2 to manually set an access point. Follow on-

screen instructions and enter an SSID, security settings, and a password.

When you use an access point that you have already connected to for 

connecting to another device, [*] is displayed for the password in step 3. To 

use the same password, press the <

o><p> buttons to choose [Next], and 

then press the <

m> button.