Canon PowerShot SX610 HS Red 手册

38

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

 

●

Following step 1 in “Using the Self-Timer” 
(

= 37), choose [ ] and press the 

[

] button.

 

●

Press the [

][

] buttons to choose the 

delay or number of shots.

 

●

Press the [ ][ ] buttons to choose a 
value, and then press the [

] button.

 

●

Once the setting is complete, [

] is 

displayed.

 

●

Follow step 2 in “Using the Self-Timer” 
(

 

●

For movies shot using the self-timer, the delay setting represents 
the delay before recording begins, but the shots setting has no 
effect.

 

●

When you specify multiple shots, image brightness and white 
balance are determined by the first shot. More time is required 
between shots when the flash fires or when you have specified 
to take many shots. Shooting will stop automatically when the 
memory card becomes full.

 

●

When a delay longer than two seconds is specified, two seconds 
before the shot, the lamp blinking and self-timer sound will speed 
up. (The lamp will remain lit in case the flash fires.)

 

●

For Still Images: Press the shutter button 
halfway to focus on the subject, and then 
press it all the way down.

 

●

For Movies: Press the movie button.

 

●

Once you start the self-timer, the lamp 
will blink and the camera will play a self-
timer sound.

 

●

Two seconds before the shot, the blinking 
and sound will speed up. (The lamp will 

remain lit in case the flash fires.)

 

●

To cancel shooting after you have 
triggered the self-timer, press the 
[

] button.

 

●

To restore the original setting, choose [

] 

in step 1.

This option delays shutter release until about two seconds after you 
have pressed the shutter button. If the camera is unsteady while you are 
pressing the shutter button, it will not affect your shot.

 

●

Follow step 1 in “Using the Self-Timer” 
(

= 37) and choose [ ].

 

●

Once the setting is complete, [

] is 

displayed.

 

●

Follow step 2 in “Using the Self-Timer” 
(