Canon PowerShot SX610 HS Red 手册
55
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [ ].
●
Follow steps 1 – 2 in “Specific Scenes”
(
(
2
Choose the shutter speed.
●
Press the [
] button, choose [ ] in the
menu, and choose the desired shutter
speed (
speed (
3
Check the exposure.
●
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
the exposure for your selected shutter
speed.
4
Shoot.
●
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
shutter button halfway, may not match the brightness of your
shots.
●
With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
delay before you can shoot again, as the camera processes
images to reduce noise.
●
Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (
secure the camera (
2
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
●
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
mode, and [Look straight at camera to
start count down] is displayed.
●
The lamp blinks and the self-timer sound
is played.
is played.
4
Join the subjects in the shooting
area and look at the camera.
●
After the camera detects a new face, the
lamp blinking and self-timer sound will
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
will remain lit.) About two seconds later,
the camera will shoot.
●
To cancel shooting after you have
triggered the self-timer, press the
[
triggered the self-timer, press the
[
] button.
●
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
shooting area, the camera will shoot about 15 seconds later.
●
To change the number of shots, press the [
][
] buttons
after choosing [
] in step 1. [Blink Detection] (
available for the final shot.