Canon PowerShot SX530 HS 手册

76

Choose from the three flash levels in [ ] mode.

 

●

Set the mode dial to [

].

 

●

Raise the flash, press the [ ] button and 
immediately turn the [

] dial to choose 

the flash level, and then press the [ ] 
button.

 

●

Once the setting is complete, [

] is 

displayed.

 

●

You can also set the flash level by accessing MENU (= 29) 
and choosing [

] tab > [Flash Settings] > [Flash Output].

 

●

You can set the flash level in [

] or [

] mode by accessing 

MENU (

] tab > [Flash Settings] > 

[Flash Mode] > [Manual].

 

●

You can also access the [Flash Settings] MENU screen (

when the flash is up by pressing the [ ] button and immediately 
pressing the [

] button.

 

●

After you set the shutter speed or aperture value, the exposure 
level may change if you adjust the zoom or recompose the shot.

 

●

Screen brightness may change depending on your specified 
shutter speed or aperture value. However, screen brightness 
remains the same when the flash is up and the mode is set to [ ].

 

●

To have the setting you did not configure in step 2 (whether 
shutter speed or aperture value) automatically adjusted to obtain 
standard exposure, hold the shutter button halfway and press the 
[

] button. Note that standard exposure may not be possible with 

some settings.

 

●

With shutter speeds of 1.3 seconds or slower, ISO speed is [

] 

and cannot be changed.

 

●

[

]: Manual

 

●

Calculation of standard exposure is based on the specified 
metering method (