Canon PowerShot N2 White 手册

16

 

●

To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.

 

●

For battery chargers that use a power cord, do not attach 
the charger or cord to other objects. Doing so could result in 
malfunction or damage to the product.

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” (

 

●

You can view images even while the battery is charging, by 
turning the  camera on and entering Playback mode (

However, you cannot shoot while the battery is charging. Also 
note that the camera cannot be used unless the battery is in it.

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

You can also charge the battery by inserting the larger plug of the 

interface cable into a computer’s USB terminal in step 4 of “Inserting and 
Charging the Battery Pack” (

on the computer, refer to the computer user manual.

 

●

The battery pack cannot be charged in some computers without 
the memory card. Install the memory card to the camera 
(

= 17) before connecting the USB terminal of the computer.

 

●

With the camera turned off, open the 
cover (1). With the smaller plug of the 
included interface cable (

orientation shown, insert the plug fully 
into the camera terminal (2).

 

●

Insert the larger plug of the interface 
cable into the included compact power 
adapter.

●

CA-DC30: Flip out the plug (1) and plug 
the compact power adapter into a power 
outlet (2).

●

CA-DC30E: Plug the power cord into the 
compact power adapter, then plug the 
other end into a power outlet.

 

●

Battery charging begins, and the USB 
charge lamp is lit.

 

●

When charging is finished, the lamp is 
turned off.

 

●

Remove the compact power adapter from 
the power outlet and the interface cable 
from the camera.