Canon KT20x5B KTS 产品宣传册

Follow Focus Control Adaptor  FC-AF1

1
2
3
4

5

6
7
8
9

10
11
12

Focus mode
Zoom mode
GND
Iris Remote/Camera

Iris cont

Power(DC12V)
Signal Common(+5.0V)
Focus control
Zoom control
Iris mode
+V1(+7.5V)
-V1(+2.5V)

Position:+7.5V
Position:+7.5V

Remote:GND
Close:+7.5V
Close:+7.5V
Close:+2.5V

Far:+7.5V
Tele:+7.5V
Position:+7.5V

Speed:OPEN
Speed:OPEN

Camera:OPEN
Open:+2.5V
Open:+2.5V
Open:+7.5V

Near:+2.5V  *1
Wide:+2.5V
Speed:OPEN

AF:+2.5V  *1

Standard
KTSM Type  *2

Speed mode

Position mode

*1 When Pin No. 1 is controlled by the AF (+2.5V) mode, it is necessary 
     that Pin No. 8 is controlled by the Focus Speed Servo (+5V

±2.5V). 

     If Pin No.8 is commanded to move by the Focus Speed Servo Signal 
     during the AF mode, the command will take precedence over the AF 
     control. However, if Pin No.8 is commanded to move by the Focus 
     Position Servo Signal during the AF mode, the focus will be 
     uncontrollable. Please be mindful of the Remote Manual Control 
     Signal during the AF mode.

*2 A special version of the 16x, the YH16x7 KTSM has been designed to 
     interface with the Panasonic AW-E650/E655 when used together with 
     Panasonic's Pan-Tilt systems

•For using with Sony DXC-990 or Panasonic AW-E650/E655, please 
 contact Canon Sales office for further infomation.

Positional Servo / AF Controller 

                                  TCR-AF1

http://www.canon.com/bctv

PRINTED IN JAPAN

Pub: 0066W778

0606SZ1