Canon PRISMAdirect 手册

The [LDAP servers] dialog displays the LDAP servers which are available to the application. The
application searches for LDAP servers in the local network and domain during the start up of the
application. All available LDAP servers are added to the list in the top of the dialogue.

The LDAP servers can be added to two different lists:
• [Servers used for authentication:]

The first LDAP server in the list is used for the authentication of a user. If the user cannot be
authenticated by the first server, then the second server is used, etc.
Click the 'Up' and 'Down' buttons to set the correct order of the LDAP servers used for
authentication.
User data can be collected from each server in this list.

• [Servers used to retrieve user data:]

The servers in this list are only used to retrieve user data that is available on an LDAP server.
The retrieved user data is filled in automatically in the mapped profile attributes and the
mapped job ticket items.

1.

Select an LDAP server from the list of available LDAP servers.

2.

Click the [Use for authentication] button.
The LDAP server is added to the list [Servers used for authentication:].

3.

Click [Test connection] to test the connection to the selected LDAP server.

1.

Select an LDAP server from the list of available LDAP servers.

2.

Click the [Use to retrieve user data] button.
The LDAP server is added to the list [Servers used to retrieve user data:].

3.

Click [Test connection] to test the connection to the selected LDAP server.

PRISMAdirect v1.2