Canon PRISMAdirect 手册

The print settings are retrieved from the document. You can optimize the printing process by
configuring the print settings. This topic describes the [Media] settings.

[Media]

All media that is used within your document is displayed here.
Use the selection-box to specify the media that you want to print. This al-
lows you to print your job in multiple batches and combine the job after-
wards.
Rename media for easy recognition of job partitions.

NOTE

The media name is displayed on the operator panel, if your printer
supports this functionality.

Column [Use
this]

In this column you can verify if the media in the document is correctly map-
ped to media in the printer.

Button [Map the
media]

You can map the media manually when the media in the document is not
correctly mapped to media in the printer.
Click the [Map the media] button to map the media manually.

The application maps the media in the document to media in the printer. In some cases, the
application cannot map the media automatically. You can map the media manually if the
automatic mapping is not correct or not possible. You can change the media properties that are
supported by the printer. The media properties that are not supported by the printer are grayed-
out. The values in the drop-down lists depend on the selected printer.

NOTE

You can send documents with page programmed settings to any printer. However, some

printers cannot process all programmed settings. In such a case a printer window appears. With

the printer window you can set the programmed settings to the capabilities of the selected

printer.

The application downloads the media catalog from the printer. Then, the application compares
the media used in the document with the media catalog from the printer. When possible, the
media in the document is mapped automatically to media from the printer catalog. You can map
the media manually if the automatic mapping is not correct or not possible.

PRISMAdirect v1.2