Canon PowerShot ELPH 190 IS Blue 手册

87

Connect two cameras via Wi-Fi and send images between them as follows.

Only Canon-brand cameras equipped with a Wi-Fi function can be

connected to wirelessly. You cannot connect to a Canon-brand camera 

that does not have a Wi-Fi function, even if it supports Eye-Fi/FlashAir 

Cards.

z

z

Press the [ ] button.

z

z

Press the [ ][ ][ ][ ] buttons to choose 

[ ], and then press the [ ] button.

z

z

Press the [ ][ ] buttons to choose [Add 

a Device], and then press the [ ] button.

z

z

Follow steps 1 – 3 on the target camera 

too.

z

z

Camera connection information will be 

added when [Start connection on target 

camera] is displayed on both camera 

screens.

z

z

Press the [ ][ ] buttons to choose an 

image.

z

z

Press the [ ] button, choose [ ], and 

press the [ ] button again.

z

z

Press the [ ][ ] buttons to choose 

[Print], and then press the [ ] button.

z

z

For detailed printing instructions, see 

z

z

To end the connection, press the [ ] 

button, press the [ ][ ] buttons on the 

confirmation screen to choose [OK], and

then press the [ ] button.

Connections require that a memory card with saved images be in the camera.

Once you have connected to devices via the Wi-Fi menu, recent destinations 

will be listed first when you access the Wi-Fi menu. You can easily connect

again by pressing the [ ][ ] buttons to choose the device and then pressing 

the [ ] button. To add a new device, display the device selection screen by 

pressing the [ ][ ] buttons, and then configure the setting.

) ►

[ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Target History] ► [Off].

To connect without entering a password in step 4, choose MENU (

► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Password] ► [Off].

[Password] is no longer displayed on the SSID screen (in step 3).

To use another access point, follow steps 3 – 4 in “Using Another Access