Canon PowerShot ELPH 190 IS Blue 手册

ç

 Contents

ç

 Chapter Contents

Connect to your access point via Wi-Fi as follows.

Also refer to the access point user manual.

Confirm that the Wi-Fi router or base station conforms to the Wi-Fi 

Connection methods vary depending on whether the access point 

For non-WPS access points, check the following information.

Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called 

the “access point name” or “network name”.

Network authentication / data encryption (encryption method / 

encryption mode)
The method for encrypting data during wireless transmission. 

Check which security setting is used: WPA2-PSK (AES), WPA2-

PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open 

system authentication), or no security.

Password (encryption key / network key)
The key used when encrypting data during wireless 

transmission. Also called the “encryption key” or “network key”.

Key index (transmit key)
The key set when WEP is used for network authentication / data 

encryption. Use “1” as the setting.

If system administrator status is needed to adjust network 

settings, contact the system administrator for details.

These settings are very important for network security. 

Exercise adequate caution when changing these settings.