Canon PowerShot N100 White 手册

155

Adjust the timing of automatic camera and screen deactivation (Auto Power 
Down and Display Off, respectively) as needed (

z

z

Choose [Power Saving], and then press 
the <

m> button.

z

z

After choosing an item, press the 
<

q><r> buttons to adjust it as needed.

To conserve battery power, you should normally choose [On] for 
[Auto Power Down] and [1 min.] or less for [Display Off].

The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].

These power-saving functions are not available when you have set Eco mode 
(

Adjust screen brightness as follows.

z

z

Choose [LCD Brightness], and then 
press the <

q><r> buttons to adjust the 

brightness.

For maximum brightness, press and hold the <

p> button for at least one 

second when the shooting screen is displayed or when in single-image display. 
(This will override the [LCD Brightness] setting on the [

3] tab.) To restore 

the original brightness, press and hold the <

p> button again for at least one 

second or restart the camera.

If you prefer, you can deactivate display of the start-up screen normally 
shown when you turn the camera on.

z

z

Choose [Start-up Image], and then 
choose [Off].