Canon PowerShot ELPH 180 Silver 手册
93
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Other Shooting
Modes
P Mode
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
•
Confirm that the battery pack is charged (
).
•
Confirm that the battery pack is inserted facing the correct way (
).
•
Confirm that the memory card/battery cover is fully closed (
•
Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
•
Battery performance decreases at low temperatures. Try warming the battery pack a
little by putting it in your pocket, for example, ensuring that the terminals do not touch
any metal objects.
•
If these measures do not help and the battery pack still runs out of power soon after
charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
•
Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it off again (
The battery pack is swollen.
•
Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from fitting in the camera, contact a Canon
Customer Support Help Desk.
Display on a TV
Camera images look distorted or are not displayed on a TV (
).
Shooting
Cannot shoot.
•
In Playback mode (
Strange display on the screen under low light (
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
•
The screen may darken under bright light.
•
The screen may flicker under fluorescent or LED lighting.
•
Purplish banding may appear on the screen if you compose a shot that includes a
bright light source.
No date stamp is added to images.
•
Configure the [Date Stamp ] setting (
added to images automatically, merely because you have configured the [Date/Time]
setting (
•
) in which [Date Stamp ]
cannot be configured (
).
[ ] flashes on the screen when the shutter button is pressed, and
shooting is not possible (
).
[ ] is displayed when the shutter button is pressed halfway (
•
Set the flash mode to [ ] (
•
•
Mount the camera on a tripod or take other measures to keep it still.
Shots are out of focus.
•
Press the shutter button halfway to focus on subjects before pressing it all the way
down to shoot (
).
•
Make sure subjects are within focusing range (
•
•
Confirm that unneeded functions such as macro are deactivated.
•