Canon ME200S-SH 手册
Preparing the Camera
26
Installing the Camera
Depending on where you install the camera, you may want to use a commercially available tripod, pan/
tilt head, housing unit or other accessory. The camera is shipped with two TB-1 Tripod Adapter Bases
for tripods and accessories with 0.95 cm (3/8") screws. In addition, the camera body itself is equipped
with sockets for 0.64 cm (1/4") screws.
tilt head, housing unit or other accessory. The camera is shipped with two TB-1 Tripod Adapter Bases
for tripods and accessories with 0.95 cm (3/8") screws. In addition, the camera body itself is equipped
with sockets for 0.64 cm (1/4") screws.
IMPORTANT
• You can mount the camera on a tripod or similar accessory but do not
use accessories with mounting screws longer than 5.5 mm (0.2 in.).
Socket for 0.64 cm (1/4") screws
for attaching a housing unit
for attaching a housing unit
Socket for 0.64 cm
(1/4") screws
(1/4") screws
TB-1 Tripod Adapter Base for tripods
with 0.95 cm (3/8") screws
with 0.95 cm (3/8") screws
TB-1 Tripod Adapter
Base for tripods with
0.95 cm (3/8") screws
Base for tripods with
0.95 cm (3/8") screws
5.5 mm