Canon ME200S-SH 手册

White Balance

40

Custom White Balance

1 Set the camera mode to [Manual] (A 31).

2 Press SET.

• One of the adjustable settings will be highlighted 

in orange on the screen.

3 Push the joystick left/right to select the current 

white balance setting.

4 Push the joystick up/down to select [WB-A] or 

[WB-B] and then press SET.

• If a custom white balance has been stored 

previously, pressing the joystick will apply the 
stored custom white balance. You do not need 
to perform the rest of the procedure.

• If a custom white balance has not yet been stored, the custom white balance display [WB-A] or 

[WB-B] and default value will flash slowly. Continue the procedure to establish the custom white 
balance.

5 Point the camera at a gray card or white object so that it fills the whole screen.

• Use the same lighting conditions you plan to use when shooting.

6 Press the SET WB button.

• [WB-A] or [WB-B] will flash quickly.
• Make sure the gray card or white object fills the screen until the procedure is completed.
• Once [WB-A] or [WB-B] stops flashing, the procedure is completed. The setting is retained even if 

you turn off the camera.

NOTES

• Readjust the custom white balance if the light source or ND filter setting changes.
• Very rarely and depending on the light source, [WB-A] or [WB-B] may keep flashing (it will change to 

a slow flashing). The result will still be better than with the auto white balance.

Color Temperature/Preset White Balance

1 Set the camera mode to [Manual] (A 31).

2 Press SET.

• One of the adjustable settings will be highlighted in orange on the screen.

3 Push the joystick left/right to select the current white balance setting.

4 Push the joystick up/down to select [Kelv] (color temperature setting), or [Dylt] or [Tung] 

(preset white balance).

• To change the color temperature or to further adjust the preset white balance, continue to step 5. 

Otherwise, press SET (the rest of the procedure is not necessary).